Central Heating and Bleeding Radiators

Have you ever taken the time to bleed your radiators? Some people won’t know what this means, whereas others will make sure they do it regularly and be familiar to it. Either way Geen warm water, central heating engineers are stressing the importance of remembering to bleed the radiators as this will make sure the central heating system is working to its full capacity.

The tip here is to make sure there is no air in the radiators. If there is trapped air then your radiators will creak and groan when the heating is turned on. This also means that the radiator isn’t going to get hot enough, as trapped air in the radiators will prevent the radiator working properly. Its just a case of bleeding the radiators every now and then, which will make sure your heating system is working to the best of its ability.

A good tip is to devote half a day to going round all the radiators to check there is no air in them and to bleed them properly. If you have the heating turned on and the room isn’t getting any warmer, the first thing to do is to check the radiator. Put your hand all over it and check if it is at all warm. Stone cold radiators immediately indicate something needs to be sorted out, yet in most cases it isn’t a massive cause for concern. Don’t worry, your heating system won’t have packed up, but what you will need to do is to bleed the radiator to get the air out. Then everything should be okay.

To be fair, in some cases it takes more than just bleeding the radiators to get everything back to normal – it could be that the central heating engineer needs to come out and take a look at the pipes or the boiler. As the heating system is a complex piece of kit, it sometimes needs specialist attention from someone who knows what they’re looking at. Regardless of whether you have central heating Mansfield or central heating Oxford, sometimes you need the engineer’s advice.


Leave a Reply

Your email address will not be published. Required fields are marked *